Find What You're Looking For
Reuland produces standard Electric Motors for custom applications. From High Speed Liquid Cooled motors to standard rated motors, Reuland has a solution for your application. Reuland’s advanced Metal Stamping, Die Casting, and Manufacturing capabilities allow us to provide our customers with a quality product every time.
Reuland variable speed, inverter duty motors are available in both open loop and closed loop designs.
Series 100 and Phasor2000 styles are designed and manufactured for the most demanding applications.
Closed loop designs will handle up to 1000:1 constant torque requirements and full torque at zero speed.
Reuland’s unique slot designs minimize the heating and noise effects induced by drive switching frequencies (harmonics) and eliminate typical cogging at low frequency operation.
Variable speed designs are also available with wide constant power ranges often required in machine tool spindle applications. Variable speed motors are available from fractional horsepower through several hundred horsepower in open, enclosed and blower cooled enclosures, continuous or intermittent duty.
Use of variable speed motors spans a multitude of applications. Machine tools, material handling, pumps, fans and elevators, to name a few.
Condor Series Permanent magnet motor construction options include: cast iron aluminum stainless steel water cooled partial motors available (rotor/stator sets) Reuland’s Condor Series permanent magnet synchronous motors are available in NEMA frames 56 through 256 (IEC optional) in 2 pole, 4 pole and 6 pole configurations. Constant or adjustable frequency up to 300 Hz available with up to 600 volt designs. Other construction features include: Speeds up to 18,000 rpm Constant torque applications Class F or H insulation with Class B rise Here’s the application data required to quote a Reuland Permanent Magnet motor: Load Inertia Acceleration Time Pull-in and Pull-out torque Frequency and Speed Range Voltage at Maximum Speed Power Supply Type Duty Cycle Ambient Condition Enclosure
Partial or “shell” motors are AC induction, squirrel cage stator and rotor sets. Partial motors range from small fractional horsepower units to several hundred horsepower. The wound stator core is available either as a machined core or with a shell housing to match most any existing diameter requirement. The rotor is available with standard or special machined bores. The user may design partial motors into their equipment and provide whatever means of cooling preferred. High-speed designs are available up to 1500 hertz.
Common applications are motorized spindles, pumps, small hoist motors, drilling and boring machines, routers, arbors, grinders or most any application where the motor must be built-in to another component.
AC induction, squirrel cage elevator motors may be two speed, single speed or variable speed (VVVF). Traditionally a DC machine, AC variable frequency is today’s state of the art prime mover for most elevators. Low slip, closed loop vector duty motors are available from 5 to 200 horsepower 4, 6, 8 or 10 pole. Reuland’s unique electrical and mechanical designs are ideally suited for the demanding low noise levels and positioning requirements required for this application.
Motors can be ordered in 1800, 1200, 900, 720, and 600 rpm. Hoist designs from severe service to standby exist. Likewise, bridge and trolley motors from continuous service to infrequent duty are available. These motors come be both AC induction and Wound Rotor designs.
Typical crane & hoist duty motors are 15, 30, and 60-minute designs in open drip proof or non-ventilated enclosures. However, we offer a wide selection of alternate or custom duty ratings. For example, wound rotor motors are available in 120-minute duty as fan cooled or non-ventilated designs while scrap-handling cranes can be rated continuous duty as blower cooled units.
Over 1000 designs exist for high speed, low power; high speed, high power and high speed, low inertia, high response machines. Ratings such as 500 HP, 10,000 RPM and 75 HP, 40,000 RPM are common. High-speed Partial motors are available up to 100,000 RPM. Each motor can be tailored to the User’s specific load/speed ranges, high torque at low speed, and wide constant power ranges.
High speed motors are commonly used with machine tools, motorized spindles, grinders, routers, pumps, arbors, test stands, dynamometers, centrifuge drives and replacing costly speed increasers.
Reuland offers a wide variety of brakes for various applications. Our popular MagnaStop brake is a solenoid activated, spring set type brake. The MagnaStop brake is available in standard and dust-tight/waterproof enclosures in standard AC voltages. Torque ratings available range from (1.5-20) lb. Ft. The brake can be ordered as a traditional C-face mount or as a “double C-face” design. The MagnaStop can also be ordered as foot mounted design.
Reuland also offers a wide range of direct acting magnetic disc brakes. These brakes are also available as standard, dust-tight/waterproof, or marine duty enclosures. Torque ratings available vary from 1.5 to 1000 lb. Ft. Reuland brakes are defined as “fail safe”. When power is applied to the brake, the brake releases the motor shaft. The load is then free to turn. When power is removed or lost, the brake grabs the motor shaft and stops the load. A brake release knob or flipper is provided to manually release the brake. We offer both adjustable and non-adjustable designs. Reuland brakes are available in both single and three phase designs. Some brakes are available in DC power. Finally, Reuland offers it’s “X” series brakes. These brakes are designed to mount to non-Reuland built motors.
Interested in one of our products? Drop us a line!