Binder

SERVO LINE

Single-disc brake for servo motors

Electromagnetic spring-applied brake for servo motors. The brake can be mounted to the A-face or B-face end shield inside the motor. The braking action is generated by compression springs. To neutralize it the electromagnetic principle involving generation of a magnetic field is applied.

• Electrically released
• Face mounting or flange mounting
• Built into motor housing, optional mounting outside the end shield
• Temperature range from -15°C to +120°C
• Toothed hub / friction disc connection with minimal circumferential backlash

VARIO LINE

Single-disc brake – flexible design

• Electrically released
• Stepless and centrally adjustable torque
• Air gap adjustment not required
• Modular design

LEIGHTWEIGHT SPRING APPLIED BRAKE

Lightweight – spring-applied brake

• Patented method
• Very light weight
• Powerful
• Energy efficient
• Good value of money
• Easy assembly
• Safe (Fail-safe / Emergency stops)

Elevation Line

The Elevation Line is primarily used for elevators, but can be used wherever the brake must meet demanding safety requirements. Electromagnetic spring-pressure brakes build up the braking torque when the current is switched off.

• Patented safety concept
• Stringent requirements
  in terms of brake safety
• Generates the brake torque when voltage
  is removed

CLASSIC LINE

Spring-applied brake – classic design

DC spring-pressure single-disc and multi-disc brakes build up the braking torque when the current is switched off and the electromagnetic force is therefore neutralized. The brake can also be equipped with an optional hand release to allow the brake to be released manually.

• Closed system
• Ready for fitting
• Steplessly and centrally adjustable torque
• Spigot for speedometer installation

EEX LINE

Single-disc brake explosion proofed

In spring-pressure brakes with explosion protection, those parts which might ignite explosive mixtures are incorporated in a housing. Electromagnetic spring-pressure brakes build up the braking torque when the current is switched off.

• Explosion or firedamp protection, dust protection in accordance with ATEX directives
• Varistor protection circuits against voltage peaks
• -20°C to +40°C ambient temperature

Module Line

Single-disc brake module

Spring-pressure single-disc brake modules for direct current which can be mounted as additional modules to a fully assembled motor – preferably to end shield A. Therefore, the Module Line has an own bearing-mounted output shaft.

• Special spring applied brakes in modular design
• Electrically released
• For fitting to A-side motor flange
• Adjustable torque